Posts Tagged ‘Kissimmee’

Orlando Plumbing Question: What is a Faucet Aerator?

Monday, April 30th, 2012 by Anthony Bracco

Saving water is something that everyone would like to do, and your Orlando plumber can tell you about all the upgrades available today, one of which is a faucet aerator. A tap aerator or faucet aerator is located on the tip of water faucets which are used indoors such as kitchen and bathroom sink faucets.  Their purpose is to spread the water stream into a number of smaller streams, in essence adding air to the water stream.  This saves the amount of water which comes out of the tap at one time while also reducing the amount of backsplash which occurs when the faucet is turned on.

Utilizing faucet aerators can be one of the most inexpensive ways to save money on your Orlando home’s water consumption and save energy.

There are two main types of faucet aerators, some which use metal or plastic screens to separate the water, and some which do not use screens. One advantage to those without screens is that they eliminate problematic clogging which occurs on screen aerators due to sediment buildup.  There are also aerators with off-valves and swivel aerators which allow users to direct flow to wherever the water spray is needed.

There are three main flow-types seen today. The needle method creates a circular pattern of small, single streams of water with no water-flow in the very center.  The aerated method created a tubular flow with air mixed into the water, creating a single stream of bubbly water.  The laminar method has no air mixed in which makes for a single stream of water with no bubbles.

Many aerators are designed as more economical low-flow aerators which optimize the water flow while still providing optimal water-flow performance.  In kitchens these low-flow options decrease flow from 2.2 gallons per minute to 1.5 gpm or 1.0 gpm, saving anywhere from 32% to 54% of water-usage.  On bathroom faucets the water-flow is decreased from 2.2 gpm to 1.0 gpm or even 0.5 gpm saving from 77% to 84% of water usage.  When engineered properly, low-flow or economic aerators can provide increased perceived water pressure while in actuality helping to save water.

When purchasing new faucet aerators, ensure that you find the proper type (male or female) and the proper size (regular or small).  There are dual-thread options for those who do not know whether a male or female aerator is necessary.  Also, look at the tap aerator’s price in conjunction with how much savings it can provide in water usage annually and see how little must be spent on each faucet in order to save hundreds of dollars. Your Orlando plumbing experts at Modern Plumbing Industries can help you find the perfect fixtures for your home.

Orlando Plumbing Repair Guide: How to Stop a Toilet from Overflowing

Monday, April 9th, 2012 by Anthony Bracco

An overflowing toilet is a really unpleasant problem to have with your Orlando plumbing, and one you will undoubtedly want to correct right away. Toilets are reliable in that they tend to last a long time and not act up much, but when yours does start to malfunction, you pay attention right away.

To start with, examine the root cause of the overflow problem. There are three major causes of overflow: a clogged or blocked drain that does not allow the toilet to flush properly, an improperly adjusted float that allows the tank to overfill and a blocked vent pipe that replaces the air in the pipe after each flush.

Each of these requires a different course of action, so let’s discuss each individually.

If the drain is blocked, you will probably know right away. For one, water will overflow from the toilet’s bowl rather than the tank. For another, there will probably be quite a mess. Treating this type of overflow problem is straightforward—remove the clog. For simple clogs, a plunger and some elbow grease will get it done. Another trick is to stick the open mouth of an empty two liter bottle into the drain and squeeze. The blast of air can knock the clog free.

If your toilet is clogging and overflowing frequently, however, the problem may not be with the drain or with anything you are doing. It may be that the vent pipe is clogged. A vent pipe moves external into the plumbing system to replace the air that is pumped out with each flush. When it is blocked, the toilet can’t flush properly, which can lead to overflowing. If you have trouble with frequent clogging, call a plumber to inspect the situation.

In both of those situations, the toilet bowl will overflow. Another possibility is that the tank overflows, which is a different kind of problem. This is often cause by the filler float being set too high, so the tank fills with too much water. You can fix this by simply adjusting the mechanism inside the tank that controls the level of the float.

Whether it’s one of these three, or something else entirely, when your toilet overflows, be sure to check it out and get it fixed right away. For any problems with your Orlando plumbing, give Modern Plumbing Industries, Inc. a call today!

Deland Plumbing Guide: Water and Energy Saving Tips

Wednesday, March 7th, 2012 by Anthony Bracco

The cost of the heat, air conditioning and water supply to your Deland home continues to rise – it’s no wonder you want to cut down on your bills. But, how can you do that without cutting into the creature comforts and conveniences you’ve gotten used to over the course of the last few decades? Here are a few simple energy and water saving tips to make your life easier.

  • Patching Leaks – Two of the biggest wasters of water are dripping faucets and leaky pipes. The amount of water wasted by a single drip every second could provide for multiple baths per year – it adds up fast. Not only are leaky faucets and pipes easy to fix; they tend to develop into bigger problems as time passes.
  • Drains and Flushing – If you put a piece of toilet paper in the toilet used to clean an eye or wipe the counter, don’t flush. It’s a waste of water. If you notice some extra toothpaste in the sink, don’t rinse yet. You can always use the water from brushing your teeth or washing your face to clean it out. Multi-task and minimize how much water goes down the drain to save water.
  • Fully Loaded – A partially filled washing machine or dish washer is a huge waster of water. Fill it up and wait to run the device until it’s at the brim – the same amount of water is used no matter how much is in the device.
  • Insulate Pipes – Hot water pipes without insulation waste a tremendous volume of energy every year. The cost of running a hot water heater every day can be anywhere from $200 to $300 per year, and that’s with insulation. Insulating hot water pipes help reduce the heat loss which will save both water and energy.
  • Lower Water Flow – Don’t crank your faucets up to the max just to get a glass of water or to check for hot water. It’s a waste of energy and it’s often unnecessary, especially when waiting for water to hit the right temperature.

If you’re interested in getting the most out of your home’s water supply, there are hundreds of little ways to save water that will add up over time. These are just some of the easiest ways to get started. To learn more ways the right plumbing upgrades can improve your Deland home, give Modern Plumbing Industries, Inc. a call today!

Orlando Plumber’s Guide: How to Prevent Bathroom Water Damage

Tuesday, February 21st, 2012 by Anthony Bracco

Water damage. Even the mere mention of potential damage from excess water in your Orlando house is enough to send a chill down your spine. However, there are a number of things you can do to avoid such damage, especially in the bathroom.

The Bathtub

The biggest single contributors to water damage are the shower and bathtub, where gallons upon gallons of water are distributed every day. You can minimize damage by doing the following:

  • Tiles – Check for missing or cracked tiles and replace them immediately. Supplement the tiles with grout that is properly sealed and check for any potential leaks.
  • Keep it Dry – There is a lot of water in your bathroom. Keep it off the floor by drying it up after a shower, hair washing or any other moisture producing activity in the bathroom. Make sure you minimize the risk of excess water by placing bathmats on the floor outside your shower.
  • Exhaust Fan – Water builds up in a bathroom because there is no moving air. Humidity can be just as damaging as actual wetness, especially if it settles in cooler temperatures. To avoid this happening, install an exhaust fan attached to the light switch to draw out any moisture after a shower.

Sinks and Fixtures

  • Check Under the Sink – Look under the sink and make sure there are no drips from the faucet and no leaks from the trap. You may simply need to check and clean the trap once every month or so.
  • Seals – Check sink seals on a regular basis for cracks or leaks and replace them when necessary.
  • Speed of Drainage – If the sink drains slowly, the drain may be clogged. Check the trap and if that doesn’t help, pour a mixture of vinegar and baking soda down weekly.
  • Upgrades – Upgrade your fixtures to save water. Toilets eat water to the tune of 40% of your annual consumption and your shower head can be made almost twice as efficient without cutting into your comfort level. If you notice a drip, crack or leak from any of these devices, simply upgrade them and you’ll save a lot of water (and reduce how much of it could leak if a problem occurs in the future).

There are a lot of ways to avoid water leaks in your bathroom. Keep a close eye on things and it will be much easier than if you waited for a full blown problem to develop. If you notice any water damage in your house, give Modern Plumbing Industries, Inc. a call as soon as possible!